下載書籍。
- 首頁
- >
- 書籍詳目頁
- 作者： 陳正倫 John Chen (著)
- 學科分類： 社會科學類
- 書籍分類： 工程技術 ; 工學院
- 出版社： 陳正倫 John Chen
- 出版地：臺灣
- 出版日期：2020/10/14
- 語文：英文
- ISBN/識別號：9789574381630
- DOI： 10.978.957438/1630
Design Secrets for Mass Production
可使用：0人
線上閱讀中：0人
下載閱讀中：0人
借閱天數：0天
書籍內容
By reading this book thoroughly:
1. You can rectify incorrect concepts as early as possible; after all, if you do it right in the first place, you will always get it right.
2. You will significantly reduce the number of times of modification, the time for repeated design modifications, as well as production and tooling modification costs.
3. You, as an inexperienced designer, can enhance your own skills without solely relying on experienced ones’ guidance.
4. You, as an experienced designer, will be enlightened at the right time to integrate your own design experience without wasting time on repetitive trials and errors.
5. You, as a design supervisor, can adopt this book as a reference for the development of internal education and training as well as design guidelines to increase design efficiency in your department.
6. You, as a project manager, can anticipate design defects and remind designers to respond in time to improve the overall product development efficiency.
- 目錄
-
1. Problematic Designs at a Glance - 2. LowCost Designs
- 3. Stable and Smooth Operation
- 4. Delicate Appearance
- 5. Use of Elasticity and Prepressing Setting
- 6. Datum and Positioning
- 7. Gap Values and Explanations
- 8. Impacts of Deviation enlargement
- 9. Myths of Hook Design
- 10. Screw Application
- 11. Methods of Increasing Strength
- 12. Important 2D Assembly Sectional Views
- 13. Simulation
- 14. Designs that are Hard to Control
- 15. Differences between MockUps and Tooling Parts
- 16. Rounds， Chamfers， and Sharp Corners
- 17. 6s Design and Tolerance Analysis
- 18. Process Capability Improvement of Factories
- 19. Parting Line
- 20. Technology Management
- 21. Interaction with Readers Q＆A and Case Study
- References
